Monel 400 Products

Product Details:

Chemical Composition, %

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer)
• Port of Dispatch: Nava Seva
• Production Capacity: 1 MT
• Delivery Time: within 3 to 4 days
• Packaging Details: EXPORT PACKING

Product Details:

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),D/A,T/T (Bank Transfer)
• Port of Dispatch: Nava seva
• Production Capacity: 5 MT
• Delivery Time: 3 TO 4 DAYS
• Packaging Details: Export Packing

Product Details:

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.

Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F. However, alloy 400 is low in strength in the annealed condition so, a variety of tempers may be used to increase the strength.

Product Details:

Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F. However, alloy 400 is low in strength in the annealed condition so, a variety of tempers may be used to increase the strength.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),D/A,T/T (Bank Transfer)
• Port of Dispatch: Nava Seva
• Production Capacity: 5 MT
• Delivery Time: READY STOCK

Product Details:

Specifications:

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: Nava seva
• Production Capacity: 1 MT
• Delivery Time: within 3 to 4 days
• Packaging Details: Export Packing

Product Details:

Monel 400 Pipe

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.

Additional Information:

• Port of Dispatch: Nava seva
• Production Capacity: 10 MT
• Delivery Time: within 3 to 4 days
• Packaging Details: Export Packing

Product Details:

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.

Additional Information:

• Port of Dispatch: Nava seva
• Production Capacity: 5 MT
• Delivery Time: 3 TO 4 DAYS
• Packaging Details: As per Your requirement

Product Details:

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.

Additional Information:

• Port of Dispatch: Nava seva
• Production Capacity: 1 MT
• Delivery Time: within 3 to 4 days
• Packaging Details: Export Packing

Product Details:

Our company is a leading company that supply, trades and exports a wide range of Monel 400 Pipe. Advanced technologies and modern equipments are used while offering these products. Monel 400 Pipe is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. These products are extremely robust in nature and ensure long lasting service life.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Western Union
• Production Capacity: 1 MT
• Delivery Time: within 3 to 4 days

Product Details:

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.

Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
• Port of Dispatch: Nava seva
• Production Capacity: 500 MT
• Delivery Time: 3 TO 4 DAYS
• Packaging Details: export packing

Product Details:

According to the needs and demands of our clients, we are engaged in offering a wide range of Monel 400 Rods all over the world. These rods are sturdily constructed and ensure optimum performance without any hassles. These products are procured from trustable vendors that ensure their smooth performance and reliability. We are offering these rods in different sizes and dimensions as per the needs.

Features:

• Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated
• Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but is seldom the material of choice for these acids
• Excellent resistance to neutral and alkaline salt
• Resistance to chloride induced stress corrosion cracking

Applications:

• Boiler feed water heaters and other heat exchangers
• Valves, pumps, shafts, fittings, and fasteners
• Industrial heat exchangers
• Chlorinated solvents
• Crude oil distillation towers

Specifications:

• Range: 3.17 mm to 350 mm diameter

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer)
• Port of Dispatch: FOB
• Production Capacity: 1 MT
• Delivery Time: within 3 to 4 days
• Packaging Details: EXPORT PACKING

Product Details:

Monel Bolt is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy Bolt is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy Bolt is rapidly attacked by nitric acid and ammonia systems.

Features:

• Resistant to seawater and steam at high temperatures
• Excellent resistance to rapidly flowing brackish water or seawater
• Excellent resistance to stress corrosion cracking in most fresh waters

Applications:

• Marine engineering
• Chemical and hydrocarbon processing equipment
• Gasoline and freshwater tanks
• Crude petroleum stills
• De-aerating heaters

Additional Information:

• Item Code: MONELBOLT
• Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
• Port of Dispatch: FOB
• Production Capacity: 10 MT
• Delivery Time: 3 TO 4 DAYS

Product Details:

Monel K500 is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this nickel steel alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other

Monel bolt is a precipitation hardenable nickel copper alloy that combines the excellent characteristics of Monel 400 with the added advantage of greater strength & hardness.

Chemical Composition

• Nickel; 63.0-70.0
• Copper; Rem
• Aluminium; 2.30-3.15
• Titanium; 0.35-0.85
• Carbon; 0.25max
• Manganese; 1.5max
• Iron; 2.0max
• Sulfur; 0.01max
• Silicon; 0.50max

Additional Information:

• Minimum Order Quantity: 1 Number

Product Details:

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.

Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F.

Additional Information:

• Port of Dispatch: Mumbai
• Production Capacity: 10 MT
• Delivery Time: within 3 to 4 days
• Packaging Details: As per Your Requirement

Product Details:

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.

Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F.

Additional Information:

• Item Code: MONELFLANGE
• Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Production Capacity: 10 MT
• Delivery Time: within 3 to 4 days

Product Details:

Monel K500 is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this nickel steel alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460° F.

Product Details:

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
• Port of Dispatch: Nava Seva
• Production Capacity: 10 MT
• Delivery Time: 3 TO 4 DAYS
• Packaging Details: EXPORT PACKING

Product Details:

We provide a unique range of Monel Fasteners, which is manufactured using premium grade of raw material like copper, brass, aluminum, phosphorus bronze, gun metal, lead, zinc, and more. Monel Fasteners available in Monel 400 Fasteners, Monel 500 Fasteners, industrial monel fasteners and many more.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),D/A,T/T (Bank Transfer),Other
• Port of Dispatch: Nava seva
• Production Capacity: 5 MT
• Delivery Time: 3 TO 4 DAYS
• Packaging Details: As per your requirement

Product Details:

Monel 400 Flange
We are one of the leading manufacturers of a quality range of Screwed Flanges to our clients. The range supplied by us includes stainless steel, carbon steel and nickel alloy screwed pipe flanges. The products are made using the forging and casting methods. In addition to this, we also offer customization on the products as per the requirements of the clients.

RANGE
½” (15 NB) to 48” (1200NB) in 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS ASA 150, ASA 300, PN 6, 10, 16, 25, 40, 64, 100, 160 ETC.
Available with NACE MR 01-75

STANDARD

• ASTM
• BS
• DIN
• JIS

STAINLESS STEEL
Grade
304, 304L, 304H, 309, 310, 310S, 316, 316Ti, 316 L, 317, 317L, 321, 347, 347 H, 409, 410, 410S, 420, 430

DUPLEX STEEL
GRADE
2205 (UNS No. S31803), 2507 (UNS No. S32750)

NICKEL ALLOY
GRADE
Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II)

COPPER ALLOY
GRADE
UNS No. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500, UNS No. C 70600 (Cu-Ni-90/10), C 71500 (Cu-Ni-70/30)

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
• Port of Dispatch: Nava Seva
• Production Capacity: 5 MT
• Delivery Time: 3 TO 4 DAYS
• Packaging Details: EXPORT PACKING

Product Details:

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.

Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: Mumbai
• Production Capacity: 10 MT
• Delivery Time: within 3 to 4 days
• Packaging Details: As per Your requirement

Product Details:

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer)
• Port of Dispatch: Nava seva
• Production Capacity: 1 MT
• Delivery Time: within 3 to 4 days
• Packaging Details: Export Packing

Product Details:

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated.

Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F. However, alloy 400 is low in strength in the annealed condition so, a variety of tempers may be used to increase the strength.

Product Details:

We are offering a complete range of Monel Fittings which is a copper nickel alloy and are available as per the following specifications:

Types of Monel Fittings: Elbow 90 deg, Elbow 45 deg, Cross, Tee, Coupling, Half Coupling & Cap

Range: 15 NB to 100 NB in 3000 LBS, 6000 LBS, 9000 LBS available with NACE MR 01-75

Grades as under:-

• Monel 400 (UNS No. N04400)
• Monel 500 (UNS No. N05500)

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),D/A,T/T (Bank Transfer),Other
• Port of Dispatch: Nava seva
• Production Capacity: 5 MT
• Delivery Time: 3 TO 4 DAYS
• Packaging Details: As per Your Requirement